FAQs

ArtRage Background 6 ArtRage Tools Overlay

Frequently Asked Questions

If you got ArtRage Lite as a free download with your Wacom Intuos Draw tablet, Wacom has changed their registration process and no longer emails the serial out. You should be able to view your ArtRage serial by logging back into their website and looking in the ‘My Library’ section. If you’re having problems following the steps, see this Wacom registration guide.

If you can’t find it, contact Wacom support and they should be able to help you (unfortunately, we don’t have access to your account with Wacom). If you have used up your downloads, or need to switch from Windows to Mac OSX (or vice versa), just register your serial in our member area to download your software as needed.

We recommend using our ArtRage 4 demo until you get everything sorted.

Unable to Validate License after downloading from the Google Play Store

validate artrage android error message

If you can’t run ArtRage for Android after purchasing from the Google Play Store, are asked to validate it everytime you open the app, or can only run it when connected to the internet, this is usually because ArtRage or the Play Store app is not properly storing or sending the purchase data. This is usually fairly easy to fix following the steps below. Note: Several things can cause this bug to occur or prevent your changes from fixing the problem, so you may have to try a few different things.

Before trying anything else, try just uninstalling the app and reinstalling it again from the Play Store. If this fails, move onto the troubleshooting steps below.

The steps we have found work most reliably are:

  1. Close ArtRage completely in your active processes
  2. Clear the ArtRage app data
  3. Clear the Play Store cache
  4. Open ArtRage and turn on Wifi to get licence data
  5. Close ArtRage completely in active processes and turn off Wifi
  6. Restart the device

We have found that clearing your ArtRage app data and then connecting to wifi to re-validate your app will usually allow you to use the app properly after that but may still give you the licence validation error on start up. Tap ‘retry’ and it should vanish and allow you to use ArtRage. If this happens, then it usually means that you missed one of the steps above, or something else is going on.

Further Troubleshooting

Find out how to do the individual steps, and other things you can try:

1. Check the Play Store Account

Are you logged in under the same account that you purchased the app under?

To check:

  1. Open the Google Play Store app
  2. Touch the Menu icon to see which account you’re currently using.
  3. To change accounts, touch the dropdown arrow Selector and select a different account.


2. Check Wifi Connection

The Play Store needs an active internet connection to verify your purchase for the first time and every time that the error shows up. Once you have validated your licence, it may work until you restart your device.

To check if the licence validation error is completely fixed, you will need to turn off wifi and restart your device.

3. Clear ArtRage app data

While the problem usually lies in the Play Store app, there is a chance that the ArtRage app data is corrupted and not storing your purchase data properly. We are investigating this issue.

Deleting the app data is basically the same process as for the Play Store app, but note that you’ll lose any current unsaved work.

Go to:
> Settings
> Application Manager
> Choose the ‘All’ tab
> Find and open the ArtRage app
> tap ‘Clear > Data’.
> Reboot the device.

4. Clear Play Store App Data

You may need to clear out some of the existing incorrect data in the Play Store App before it notices that you’ve paid for ArtRage.

Make sure that your device is connected to the internet.

Clearing out your Play Store app data

  1. Check that the Play Store app is up to date. If not, install any updates.
  2. Clear the cache.
    • Go to:
      > Settings
      > Application Manager
      > Choose the ‘All’ tab
      > Find and open the Google Play Store app
      > Tap ‘Clear Cache’.

    • Restart Google Play
    • Reboot your device, and try running ArtRage again.


If it still doesn’t work Clear data as well (this will remove your saved Play Store settings)

  1. Go back into the app following the steps above, then tap ‘Clear > Data’.
  2. Restart Google Play
  3. Reboot your device, and try running ArtRage again.


5. Turn Google Backup Off

If you have the automatic backup enabled, it may be overwriting the licence data whenever you restart the device. Try disabling it temporarily to allow the changes to be saved.
  1. Go to your device settings
  2. Find the backup and reset options
  3. Disable ‘Back up my data’
  4. Restart the device (you may need to go online to validate the app one final time)


6. Reinstall ArtRage

Uninstalling and reinstalling ArtRage will clear out all the app data and give you a fresh install. This should also update the licence data.

Go to:
> Settings
> Application Manager
> Choose the ‘All’ tab
> Find and open the ArtRage app
> Uninstall
> Redownload ArtRage from the Play Store (You should not be asked to pay again)

7. Repurchase ArtRage for Android

If you still can’t get it to work, contact us with your order number for a refund. Purchasing ArtRage again gives the Play Store app a second chance at validating the app properly.

(Note: you can get a refund automatically through the Play Store within 15 minutes, if you’re still within that time).

Problems Registering in the Member Area

If you are having a problem registering when you attempt to enter your serial number, it is likely to be one of the following issues:

Nothing happens when I enter my serial number

Sometimes the page does not update immediately. If you enter your serial number, the box disappears, and you do not get an error message of any kind, then you have probably registered successfully.

To get the serial number to appear and access your downloads, try:

  • Refreshing the page
  • Logging out and back in again


Serial number already registered

Serial numbers can only be registered under one account. If you get an error message saying that the serial number has already been registered, then you may already have an account under a different email address.

If you cannot find your other account, or do not think you have one, then please contact us and we will look up the details for you.

The serial you entered is not valid

The usual reason is that you are entering a non-ArtRage serial number (e.g. a Wacom Software Download Code), or have a made a mistake in one or more of the digits.

See:

If you never receive a confirmation email on sign up

You will not be able to log back into your member area account until you have confirmed that you own the email address that you used to register with. You can do this by clicking the link in the confirmation email that we send you.

Sometimes the confirmation email is blocked by a spam filter and automatically deleted. Hotmail accounts are the most likely to have a problem.

The other usual reason is that there is a mistake in the email address that you entered and the email is being sent to the wrong address.

If you never receive the link to confirm your registration, contact us and we can approve your account for you.

Where do I get my serial number for my Wacom tablet?

Wacom bundles ArtRage in two different ways: CD-ROM or software download.

If it was on a CD, then the serial number should be printed on the CD case.

If ArtRage was included as a software download, then there should be a Software Bundle Download Code printed somewhere on the packaging. If you bought an Intuos Draw, see ArtRage Lite – Wacom Users for help locating your SBD code. You would register this code at www.wacom.com, which will then unlock your software downloads and serial numbers.

An email should be automatically generated, containing your ArtRage serial number (it may also be called a registration code or license key), as well as access to your download of ArtRage. You should also be able to log back in at Wacom and view your serial number again.

Once you have your serial number, you can register it in the Member Area and download the latest version of ArtRage directly from us if you wish.

If you are having problems registering with Wacom, then you should contact Wacom support for assistance as we cannot help directly with their registration process.

My registration key / serial number is not accepted when I enter it

If you receive an error indicating that your ArtRage product key is not valid, please check the following…

Note: The serial number can also be known by some as the registration key, license code or product key, it means the same thing.

Unlocking ArtRage

Before you can use ArtRage for the first time you will need to unlock it using your Serial Number. Your Serial Number is a 25 digit number that you should have received when you purchased the product.

If you purchased ArtRage from us online your Serial Number will be in the email that contains your product download link. If you received ArtRage on CD you will need to check the CD cover or the contents of the box it came in.

When you start ArtRage for the first time you will be presented with the Unlock Panel. If you follow the instructions on this panel, enter your Serial Number then click OK the product should be unlocked. If you enter your Serial Number and it does not work please check the number you are entering carefully to make sure there are no mistakes. If you received the number in an email you can copy it from the email and paste it in to the panel using the button provided. If that still does not work please use the ArtRage Support Page to request support.

ArtRage Studio / Studio Pro

ArtRage Studio and Studio Pro serial numbers are 25 characters long, split in to groups of 5. If your serial number is not accepted when you enter it, please make sure you have copied it correctly. You can paste it in to the Unlock panel using the button provided.

ArtRage 2

Artrage keys are 20 digits long, so if you are entering a different number of digits, check that it is being read correctly. If you are copying and pasting the registration key, make sure that you are not copying any additional spaces or additional information, just the key itself.

Common Typo Mistakes

You might have mistyped your product key. Try retyping it carefully, making sure each character is correct.

What you see:It could be:
Letter “O”Number Zero “0”
Letter “I”Number One “1”
Letter “S”Number Five “5”
Letter “B”Number Eight “8”
Letter “W”Two Letters “V” “V”

Load More

← FAQs